download file at:
Command: _Box
First corner of base ( Diagonal 3Point Vertical Center ) _3Point
Command: _Box
Command: _Box
First corner of base ( Diagonal 3Point Vertical Center ) _3Point
Command: _Zoom
Drag a window to zoom ( All Dynamic Extents Factor In Out Selected Target 1To1 ) _Extents
Command: _Scale1D
Creating meshes... Press Esc to cancel
Command: _Circle
Center of circle ( Deformable Vertical 2Point 3Point Tangent AroundCurve FitPoints ) _Tangent
First tangent curve ( Point ) _Pause
Second tangent curve or radius <7.000> ( Point FromFirstPoint ) _Pause
Third tangent curve. Press Enter to draw circle from first two points ( Point ) _Radius
Command: _Circle
Command: e
Command: extrude
Command: _ExtrudeCrv
1 extrusion added to selection.
Command: _Sphere
Command: _Move
Creating meshes... Press Esc to cancel
1 surface, 1 extrusion added to selection.
Command: co
Command: copy
Command: mirror
Command: _Plane
First corner of plane ( 3Point Vertical Center Deformable ) _3Point
Creating meshes... Press Esc to cancel
Command: M
Command: _Move
Command: copy
Command: _Circle
Command: _Circle
Command: _Circle
Center of circle ( Deformable Vertical 2Point 3Point Tangent AroundCurve FitPoints ) _Vertical
Command: mirror
Creating meshes... Press Esc to cancel
Command: mirror
Command: mi
Command: mirror
Command: _Delete
1 curve added to selection.
Command: _Delete
4 surfaces added to selection.
Command: M
Command: _Move
1 surface added to selection.
Command: _Delete
Command: _Zoom
Command: _Zoom
we make a line and arch,
copy the arch to the bottom of the pillar:
turn off all layers except the curtains,
connect the upper line and lower arch with a line,
sweep 1 rail (vertical line) on cross curves (upper line and lower arch)
result:
the form is not straight..
for the correct result we must sweep 2 rails (upper line and lower arch) on cross curve (vertical line)
we mirror the curtain:
result:
No comments:
Post a Comment